User Tools

Site Tools


democap:uipanelcharacter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
democap:uipanelcharacter [2022/01/31 01:43] dragonlorddemocap:uipanelcharacter [2023/06/04 01:00] (current) dragonlord
Line 113: Line 113:
 Quickly recalibrates. To use recalibration the character has to be properly calibrated and the VR device configuration is unchanged. This allows to adjust the position of VR devices and updating the calibration without needing to do a full calibration. This is typically used to adjust VR controller slot parameters to check if the work better than the previous ones. Quickly recalibrates. To use recalibration the character has to be properly calibrated and the VR device configuration is unchanged. This allows to adjust the position of VR devices and updating the calibration without needing to do a full calibration. This is typically used to adjust VR controller slot parameters to check if the work better than the previous ones.
  
 +====== Tweaking ======
 +
 +This panel shows tweak-able parameters of all motion transfers present in the active character configuration. The majority of parameters are static after the character has been calibrated. Some parameters though are tricky to get right in the [[democap:dialog_characterconfiguration|Character Configuration Dialog]]. These parameters can be modified while seeing the effect right on the calibrated character. Select the motion transfer from the combo box to show the tweak-able parameters. Tweaked parameter values are automatically saved to the configuration file. The tweaked values stick after calibrating the character again.
 +
 +See [[democap:main#character_tweaking|Character Tweaking]] for all available panels.
democap/uipanelcharacter.1643593401.txt.gz · Last modified: 2022/01/31 01:43 by dragonlord